| Technical Information | |
|
|
| If you have a technical question relating to Battery Chargers for Lead Acid batteries or Sealed Lead Acid batteries, please review the list to see if the topic you need is covered below. If not contact our sales department 07917 226950 or the technical department on 01225 791805. |
| WARNING: SAFETY CONCERNS These FAQ notes are intended for use of suitably qualified persons only. This page is provided for free, in good faith, on an “as-is” basis, by and on behalf of Dektron Ltd. The answers given are BASED UPON EXPERIENCE AND ARE EFFECTIVE, to the best of our belief. However, the reader is responsible for verifying these points, by checking with the battery charger manufacturer, and the battery manufacturer, and for testing their system, to ensure that the systems they design and supply to their customers are safe and reliable. Nothing in this FAQ page should be relied upon to contradict information available elsewhere. Battery chargers are safe and effective if used correctly and in accordance with the supplied instructions. However, repairs and adjustments should only be carried out by suitably trained technicians or engineers. If you are in any doubt, or if you are not suitably trained, you should not operate the unit with any covers or screws removed, or make any internal adjustments or modifications, or operate the unit in any way other than as set out in the instructions supplied with it. The safety aspects to consider when working on battery chargers include, but are not limited to, danger of electric shock from the AC input and primary circuits, danger of burns or fire from short circuits or poorly made connections in the high current DC output battery circuits, and danger of explosions due to spark ignition of hydrogen gas produced by the battery when charging. |
Exegon Ltd
1-3 Poulsom's Yard, Strattons Walk
Melksham, Wiltshire, SN12 6JL
Tel: 01225 791805 - Fax: 01225 791629
Email: sales@exegon.com