Pro-Duty Beta Chargers Cover page PDF - 753k back
 Available as Singles or as Banks of five

 The rugged steel case of the Beta range of chargers, along with the many  other features, make them ideal for cyclic and industrial type applications.  Although these units can also be set for just standby or float type charging.  The low voltage start and 3 charging stages, including proportional timing,  make these units good at recovering batteries which have been misused or  neglected during use. These chargers can be left connected to the battery  even when the mains is turned off without fear of flattening the battery
 as there is no parasitic band. With the CE mark and EEC approvals these  chargers are "quality in a box".

 Features

  • 6V, 12V or 24V output voltages
  • 110V or 240V input voltages
  • 2A up to 4A output current
  • Output connector options
  • 3 stage charging
  • Proportional timing
  • 3 LED status indication
  • Reverse polarity protection
  • Rugged steel case
  • Short circuit protection
  • Independent overrun timer
  • Soft start current control

 

Model Input Voltage Output
(Volt/Amps)
Dimensions
(L x W x H mm)
Weight
(Kg)
Minimum
Battery Size
Download
Hi-Res Lo-Res
Beta62 220/240V 50Hz 6V 2A 150 x 95 x 125 3 8Ah PDF PDF
Beta122 220/240V 50Hz 12V 2A 150 x 95 x 125 3 8Ah PDF PDF
Beta124 220/240V 50Hz 12V 4A 150 x 95 x 125 3 16Ah PDF PDF
Beta241 220/240V 50Hz 24V 1A 150 x 95 x 125 3 4Ah PDF PDF
Beta242 220/240V 50Hz 24V 2A 150 x 95 x 125 3 8Ah PDF PDF

Exegon Ltd
1-3 Poulsom's Yard, Strattons Walk
Melksham, Wiltshire, SN12 6JL
Tel: 01225 791805 - Fax: 01225 791629
Email: sales@exegon.com